User Guide & FAQs

Hygisolve Dissolver is a patented hygiene solution designed to neutralise biological waste and dissolve the Super Absorbent Polymer (SAP) and absorbent core found in used sanitary pads and diapers, enabling cleaner, safer and more responsible disposal.

Unlike conventional disinfectants or cleaning chemicals, Hygisolve is specifically engineered using patented technology to treat absorbent hygiene waste.

Yes. Hygisolve Dissolver is protected by patented technology.
Patent No.: 202641008976

Depending on the product variant:

• Baby diapers
• Adult diapers
• Sanitary pads

Use normal tap water. Hot water is not required.

Use 5–10 grams of Hygisolve Compound in 5 litres of normal tap water.

Always add Hygisolve Compound to water—never water onto the compound. This ensures proper mixing, optimum performance and safe handling.

Hygisolve uses a concentrated patented formulation. Only a small quantity is required to effectively treat 5 litres of water, making the process both effective and economical.

Plastic components prevent the Hygisolve solution from reaching the Super Absorbent Polymer (SAP) and absorbent core. Removing as much plastic as possible exposes the absorbent material to the Hygisolve solution, allowing the patented formulation to neutralise biological waste and dissolve the SAP effectively.

Remove as much plastic as reasonably possible before treatment. Any remaining plastic can easily be removed after treatment using the supplied plastic stick.

There is no fixed number. Using 5 litres of Hygisolve solution, you may treat as many used diapers or sanitary pads as the solution can comfortably hold, provided all absorbent material remains completely submerged throughout the treatment. If everything cannot remain submerged, prepare another batch.

Complete submersion ensures that the Hygisolve solution comes into direct contact with all absorbent material, allowing effective neutralisation of biological waste and complete dissolution of the SAP and absorbent core.

Approximately 30 minutes.

Yes. Leaving them longer will not adversely affect the treatment process.

Hygisolve’s patented technology:

• Neutralises biological waste.
• Dissolves the Super Absorbent Polymer (SAP).
• Dissolves the absorbent core.
• Produces an alkaline treated solution.

Yes. The treatment neutralises biological waste and helps eliminate unpleasant odours associated with used absorbent hygiene products.

Only the plastic components remain. Remove them using the supplied plastic stick and dispose of them responsibly.

The biological waste is neutralised during the Hygisolve treatment process.

The SAP and absorbent core dissolve completely during treatment.

After approximately 30 minutes, the treated solution becomes alkaline and, based on Hygisolve’s product validation, may be safely used around plants as directed or disposed of through regular household drainage and plumbing systems.

Yes. Based on Hygisolve’s product validation, the treated solution may be disposed of through regular household drainage and plumbing systems when used as directed.

Yes. When used as directed, the treated solution is suitable for disposal through normal household plumbing and septic systems.

Based on Hygisolve’s product validation, the alkaline treated solution may be safely used around plants as directed.

No. Plastic components should always be disposed of responsibly.

Hygisolve neutralises the biological waste and dissolves the absorbent core and Super Absorbent Polymer (SAP). Only the plastic components remain and should be disposed of responsibly.

Dispose of the remaining plastic according to your local recycling and waste management guidelines.

Yes. Use only as directed.

Adult supervision is recommended. Keep out of reach of children.

Wash thoroughly with water. Avoid prolonged contact.

Rinse immediately with plenty of clean water. Seek medical advice if irritation persists.

No. Never mix Hygisolve with bleach, acids or other household chemicals.

Store tightly closed in a cool, dry place away from direct sunlight.

No. Always prepare a fresh solution for each treatment.

Refer to the expiry date printed on the bottle.

Purchase only from authorised sellers and verify the patented technology information printed on the label.

Yes. Hygisolve is suitable for institutional use when used according to Hygisolve’s recommended operating procedures.

Because Hygisolve offers a patented solution that:

• Neutralises biological waste.
• Dissolves the Super Absorbent Polymer (SAP) and absorbent core.
• Helps eliminate unpleasant odours.
• Produces an alkaline treated solution.
• Supports cleaner, safer and more responsible disposal.
• Helps reduce the environmental impact of absorbent hygiene waste.